Jellas 3-in-1 Soil pH/Moisture Meter
The 3-in-1 moisture meter is design for your plants, to let you know the condition of your plants,care of its health.
You can test the soil conditions of fruits(for watermelon), flowers(for African Violet),vegetables, shrubs,etc. You don't need to worry about if need to watering, too acidic or alkaline.
Just buy it---a must have household!
1-10 (1-3 Dry, 4-7 Nor, 8-10 Wet).
0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Nor, 1000-2000 Hgh).
3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline).
Product Size: 10.2 x 2.0 x 1.2 inches.
Probe length: 7.0 inches.
Distance between probes: 0.4 inch.
Copper probe diameter: 5 mm.
Aluminum probe diameter: 5 mm.
Package weight: 2 oz/56g; 13*3*0.8 in
Step 1: Switch moisture/pH/light position.
Step 2: Stick the probe into the soil about 2-4 inches.
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly.
Step 4: After 10 minutes, Note moisture/pH/light level in the dial.
Step 5: Remove probe from soil and wipe clean after each use.
▼Please note do not touch the stone or hard rock soil, It's easy to damage the probes if the soil is too hard and dry.
▼Do not use it to test pure water or other liquid, electrolytic response index will be affected, it can only be used to measure the soil.
▼After using, need to clean and wipe the probes.
If you find the 3-in-1 moisture meter which you received is defective, please contact Jellas Support directly.